END MILLS
-
10°/15° Right Spiral Flutes
-
Steel
FRACTIONAL TYPE 3352 - 10°/15° RIGHT SPIRAL FLUTES - FOR STEEL
TYPE 3352
Flute long carbide tips brazed to hardened alloy steel bodies.
Fewer flutes than Type 3350 increases chip room for faster chip removal where high feeds and speeds remove large volume of steel. Tool diameters under 5/8" have 10° right spiral flutes.
For milling steels and tough steel alloys.
Tool diameter tolerance: +.002"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER		 CARBIDE
TIP
LENGTH		 OVERALL
LENGTH		 NO. OF
FLUTES		 EDP
NO.		 PRICE
EACH		 COATING PRICE
DECIMAL FRAC. TiN TiCN
TiAlN
 .5000    1/2     1/2  1         3         2 335217 $87.55 * *
 .5625    9/16    1/2  1         3         2 335218 94.10 * *
 .6250    5/8     5/8  1  1/4  3  3/8  2 335221 101.15 * *
 .7500    3/4     5/8  1  1/4  3  3/8  2 335225 108.55 $127.05 $132.65
 .8750    7/8     7/8  1  1/2  3  3/4  2 335229 124.25 148.00 155.70
1.0000 1         1         1  1/2  4         4 335233 174.30 198.25 205.85
1.2500 1  1/4  1         1  3/4  4  1/4  4 335240 235.15 270.50 282.45
1.5000 1  1/2  1  1/4  2         4  1/2  4 335248 260.55 309.20 317.60
* Call for price & availability.