END MILLS
-
Center Cutting
-
Straight Flutes (3)
-
Non-Ferrous & Cast Iron
FRACTIONAL TYPE 3314 - THREE STRAIGHT FLUTES - FOR NON-FERROUS & CAST IRON
TYPE 3314
Flute long carbide tips brazed to hardened alloy steel bodies.
One flute is center cutting.
Tool diameter tolerance: +.002"/-.000".
Straight shank with drive flats.
For plunge and side cut milling at moderate feeds and speeds.
TOOL DIAMETER SHANK
DIAMETER		 NO. OF
FLUTES		 CARBIDE
TIP
LENGTH		 OVERALL
LENGTH		 EDP
NO.		 PRICE
EACH		 COATED PRICE
DECIMAL FRAC. TiN TiCN
TiAlN
 .3750    3/8     3/8  3    1/2  2  1/2  331412 $90.95 $93.05 $95.20
 .4375    7/16    3/8  3    3/4  2  1/2  331414 92.95 97.30 100.30
 .5000    1/2     1/2  3    3/4  3         331416 95.40 99.80 102.70
 .5625    9/16    1/2  3    3/4  3         331418 99.05 105.30 109.05
 .6250    5/8     5/8  3    3/4  3  1/4  331420 116.00 123.20 127.80
 .7500    3/4     5/8  3    3/4  3  3/8  331424 121.30 130.85 136.45
 .8750    7/8     7/8  3    3/4  3  3/4  331428 141.60 154.85 162.45
1.0000 1            7/8  3    3/4  3  3/4  331432 155.60 168.00 175.70
1.1250 1  1/8  1         3    3/4  4         331436 166.65 183.95 193.60
1.2500 1  1/4  1         3    3/4  4         331440 193.15 209.65 219.65
1.5000 1  1/2  1  1/4  3    3/4  4         331448 229.60 253.55 261.85