END MILLS
-
Straight Flutes (4)
-
Non-Ferrous Soft - Upsharp
FRACTIONAL TYPE 3305 - UPSHARP - FOUR STRAIGHT FLUTES - FOR ALUMINUM & OTHER NON-FERROUS
TYPE 3305
Flute long carbide tips brazed to hardened alloy steel bodies. Manufactured with sharp cutting edges on the periphery. Upsharp end mills permit maximum metal removal with less horsepower
Best when machine horsepower allows a higher capacity end mill.
For milling aluminum, magnesium, zinc, brass, bronze, plastics and non-metals.
Tool diameter tolerance: +.005"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER		 CARBIDE
TIP
LENGTH		 OVERALL
LENGTH		 NO. OF
FLUTES		 EDP
NO.		 PRICE
EACH
DECIMAL FRAC.
 .2500    1/4     3/8     1/2  2  1/2  4 330508 $53.50
 .4375    7/16    3/8  1         2 11/16 4 330514 57.95
 .5000    1/2     1/2  1         3  1/4  4 330516 61.55
 .5625    9/16    1/2  1         3  3/8  4 330518 69.10
 .6250    5/8     1/2  1         3  3/8  4 330520 72.40
 .6875   11/16    5/8  1         3  3/8  4 330522 79.65
 .7500    3/4     5/8  1         3  5/8  4 330524 79.65
 .8125   13/16    5/8  1         3  5/8  4 330526 91.30
 .8750    7/8     5/8  1  1/4  4         4 330528 94.20
 .9375   15/16    7/8  1  1/4  4         4 330530 100.40
1.0000 1            7/8  1  1/4  4         4 330532 108.85
1.1250 1  1/8  1         1  1/4  4  1/4  4 330536 123.35
1.2500 1  1/4  1         1  1/4  4  1/4  4 330540 138.65
1.5000 1  1/2  1  1/4  1  1/2  4  1/2  4 330548 171.80