END MILLS
-
Straight Flutes (2)
-
Non-Ferrous Soft - Upsharp
FRACTIONAL TYPE 3303 - UPSHARP - TWO STRIAIGHT FLUTES - FOR ALUMINUM & OTHER NON-FERROUS
TYPE 3303
Flute long carbide tips brazed to hardened alloy steel bodies. Manufactured with sharp cutting edges on the periphery. Upsharp end mills permit maximum metal removal with less horsepower
Large flute capacity for easier chip removal. Excellent when machine horsepower is too low for higher capacity end mills.
For milling aluminum, magnesium, zinc, brass, bronze, plastics and non-metals.
Tool diameter tolerance: +.005"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER		 CARBIDE
TIP
LENGTH		 OVERALL
LENGTH		 NO. OF
FLUTES		 EDP
NO.		 PRICE
EACH
DECIMAL FRAC.
 .2500    1/4     3/8     1/2  2  1/2  2 330308 $49.90
 .4375    7/16    3/8  1         2 11/16 2 330314 53.35
 .5000    1/2     1/2  1         3  1/4  2 330316 56.75
 .5625    9/16    1/2  1         3  3/8  2 330318 62.95
 .6250    5/8     1/2  1         3  3/8  2 330320 62.95
 .6875   11/16    5/8  1         3  3/8  2 330322 65.85
 .7500    3/4     5/8  1         3  5/8  2 330324 67.95
 .8125   13/16    5/8  1         3  5/8  2 330326 79.05
 .8750    7/8     5/8  1  1/4  4         2 330328 82.80
 .9375   15/16    7/8  1  1/4  4         2 330330 85.10
1.0000 1            7/8  1  1/4  4         2 330332 88.85
1.1250 1  1/8  1         1  1/4  4  1/4  2 330336 91.20
1.2500 1  1/4  1         1  1/4  4  1/4  2 330340 101.70
1.5000 1  1/2  1  1/4  1  1/2  4  1/2  2 330348 126.05