Menu
SEMI-FINISHED TYPE 3430 - STRAIGHT FLUTE LONG CARBIDE
TYPE
Semi-finished reamers are furnished with a tool diameter above the largest diameter indicated in the size range column below.

Before semi-finished reamers can be used, the tool diameter must be finished ground and relieved. The reamer end must be faced and chamfered.

Semi-finished reamers are used by regrind shops or distributors and users with regrind facilities.

Below is Lexington Cutter's selection of Semi-finished Reamers. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
Pin cross hole permits use in floating holders.
SEMI-FINISHED
TOOL DIAMETER
RANGE		 EDP
NO.		 PRICE
EACH
 .1770 -  .2040 343006SF $46.95
 .2041 -  .2210 343007SF 46.95
 .2211 -  .2380 34302344SF 46.95
 .2381 -  .2530 343008SF 46.95
 .2531 -  .2840 343009SF 46.95
 .2841 -  .3150 343010SF 54.60
 .3151 -  .3470 343011SF 55.15
 .3471 -  .3780 343012SF 59.70
 .3781 -  .4090 343013SF 60.55
 .4091 -  .4410 343014SF 71.80
 .4411 -  .4720 343015SF 71.80
 .4721 -  .5030 343016SF 78.45
 .5031 -  .5340 343017SF 78.45
 .5341 -  .5660 343018SF 82.80
 .5661 -  .5970 343019SF 82.80
 .5971 -  .6280 343020SF 85.00
 .6281 -  .6590 343021SF 85.00
 .6591 -  .6910 343022SF 88.90
 .6911 -  .7220 343023SF 88.90
 .7221 -  .7530 343024SF 91.20
 .7531 -  .7840 343025SF 91.20
 .7841 -  .8160 343026SF 99.05
 .8161 -  .8470 343027SF 99.05
 .8471 -  .8780 343028SF 108.30
 .8781 -  .9090 343029SF 108.30
 .9091 -  .9410 343030SF 119.20
 .9411 -  .9720 343031SF 119.20
 .9721 - 1.0030 343032SF 125.15
1.0031 - 1.0660 343034SF 125.15
1.0661 - 1.1280 343036SF 146.35
1.1281 - 1.1905 343038SF 152.65
1.1906 - 1.2530 343040SF 178.85
1.2531 - 1.3155 343042SF 178.85
1.3156 - 1.3780 343044SF 181.35
1.3781 - 1.4405 343046SF 211.45
1.4406 - 1.5030 343048SF 253.95

Do you need special Semi-finished Reamers?

If you can't find the specific Semi-finished Reamers you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Semi-finished Reamers.

Thank you for using Lexington Cutter for your Semi-finished Reamers.