Menu
FRACTIONAL TYPE 3476 - REGULAR LENGTH STRAIGHT SHANK & FLUTES
TYPE
These precision ground carbide tipped reamers accurately finish holes in most materials resulting in properly fitted dowel pins. Should be used in pairs .0005" and .0020" under fraction size. Note special undersize tolerance.
Designed and manufactured for maximum tool life. Used for all general types of reaming including low carbon steel, cast iron, non-ferrous metals and non-metals.
Below is Lexington Cutter's selection of Dowel Pin Size Reamers. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
Tool diameter tolerance: +.0000"/-.0002".
TOOL
DIAMETER		 SHANK
DIAMETER		 NO. OF
FLUTES		 LENGTH EDP
NO.		 PRICE
EACH
FLUTE CARBIDE OVERALL
 .1855   11/64 4 1  1/8     1/2  4  1/2  347617 $53.25
 .1870   11/64 4 1  1/8     1/2  4  1/2  347618 53.25
 .2480   15/64 4 1  1/2     1/2  6         347623 53.25
 .2495   15/64 4 1  1/2     1/2  6         347624 53.25
 .3105    9/32 4 1  1/2     1/2  6         347630 54.45
 .3120    9/32 4 1  1/2     1/2  6         347631 54.45
 .3730    5/16 4 1  3/4     5/8  7         347636 56.50
 .3745    5/16 4 1  3/4     5/8  7         347637 56.50
 .4355    3/8  4 1  3/4     5/8  7         347642 63.15
 .4370    3/8  4 1  3/4     5/8  7         347643 63.15
 .4980    7/16 6 2            5/8  8         347648 69.25
 .4995    7/16 6 2            5/8  8         347649 69.25
CASED SET OF ABOVE 12 REAMERS 347600 664.80

Do you need special Dowel Pin Size Reamers?

If you can't find the specific Dowel Pin Size Reamers you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Dowel Pin Size Reamers.

Thank you for using Lexington Cutter for your Dowel Pin Size Reamers.