FRACTIONAL TYPE 3300 - TWO STRAIGHT FLUTES - FOR STEEL
Flute long carbide tips brazed to hardened alloy steel bodies.
Large flute capacity for easier chip removal. Excellent when machine horsepower is too low for higher capacity end mills.
| TOOL DIAMETER | SHANK DIAMETER |
CARBIDE TIP LENGTH |
OVERALL LENGTH |
NO. OF FLUTES |
EDP NO. |
PRICE EACH |
|
|---|---|---|---|---|---|---|---|
| DECIMAL | FRAC. | ||||||
| .2500 | 1/4 | 3/8 | 1/2 | 2 1/2 | 2 | 330008 | $64.55 |
| .3125 | 5/16 | 3/8 | 5/8 | 2 1/2 | 2 | 330010 | 67.25 |
| .3750 | 3/8 | 3/8 | 5/8 | 2 1/2 | 2 | 330012 | 71.80 |
| .4375 | 7/16 | 3/8 | 1 | 2 11/16 | 2 | 330014 | 71.80 |
| .5000 | 1/2 | 1/2 | 1 | 3 1/4 | 2 | 330016 | 73.50 |
| .5625 | 9/16 | 1/2 | 1 | 3 3/8 | 2 | 330018 | 81.50 |
| .6250 | 5/8 | 1/2 | 1 | 3 3/8 | 2 | 330020 | 81.50 |
| .7500 | 3/4 | 5/8 | 1 | 3 5/8 | 2 | 330024 | 91.50 |
| .8750 | 7/8 | 5/8 | 1 1/4 | 4 | 2 | 330028 | 108.10 |
| 1.0000 | 1 | 7/8 | 1 1/4 | 4 | 2 | 330032 | 119.50 |
| 1.1250 | 1 1/8 | 1 | 1 1/4 | 4 1/4 | 2 | 330036 | 122.35 |
| 1.2500 | 1 1/4 | 1 | 1 1/4 | 4 1/4 | 2 | 330040 | 136.45 |
| 1.5000 | 1 1/2 | 1 1/4 | 1 1/2 | 4 1/2 | 2 | 330048 | 175.70 |
| 1.7500 | 1 3/4 | 1 1/4 | 1 1/2 | 4 1/2 | 2 | 330056 | 197.10 |
| 2.0000 | 2 | 1 1/4 | 1 1/2 | 4 1/2 | 2 | 330064 | 235.35 |
Do you need special Two Straight Flute End Mills?
If you can't find the specific Two Straight Flute End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special Two Straight Flute End Mills.
Thank you for using Lexington Cutter for your Two Straight Flute End Mills.
