Menu
FRACTIONAL TYPE 3306 - 6° RIGHT SPIRAL FLUTES - FOR NON-FERROUS & CAST IRON
TYPE
Manufactured with a precise .002" to .003" radial edge on the periphery, thus eliminating the need to hand hone the feathered edge. This small margin results in a stronger cutting edge and minimizes edge chipping. Radial edged for longer tool life. Flute long carbide tips brazed to hardened alloy steel bodies.
Spiral flutes help remove chips, permitting faster speeds and heavier feeds. Produces better finish.
Below is Lexington Cutter's selection of 6° Right Spiral Flute End Mills. We offer a wide variety of carbide tipped and solid carbide cutting tools. Over 95% are in stock either finished or semi finished for fast delivery.
For milling cast iron, non-ferrous metals and non-metals.
Tool diameter tolerance: +.002"/-.000".
Straight shank with drive flats.
TOOL DIAMETER SHANK
DIAMETER		 CARBIDE
TIP
LENGTH		 OVERALL
LENGTH		 NO. OF
FLUTES		 EDP
NO.		 PRICE
EACH		 COATING PRICE
DECIMAL FRAC. TiN TiCN
TiAlN
 .2500    1/4     3/8     1/2  2  1/2  2 330608 $58.50 $58.15 $59.65
 .3125    5/16    3/8     5/8  2  1/2  2 330610 60.70 61.95 64.35
 .3750    3/8     3/8     5/8  2  1/2  2 330612 64.95 65.85 68.10
 .4375    7/16    3/8  1         2 11/16 2 330614 64.95 * *
 .5000    1/2     1/2  1         3  1/4  2 330616 66.65 71.95 75.80
 .5625    9/16    1/2  1         3  3/8  2 330618 73.80 * *
 .6250    5/8     1/2  1         3  3/8  4 330620 76.65 83.30 88.25
 .7500    3/4     5/8  1         3  5/8  4 330624 87.55 96.45 102.60
 .8750    7/8     5/8  1  1/4  4         4 330628 117.05 116.15 124.55
1.0000 1            7/8  1  1/4  4         4 330632 135.25 130.35 138.75
1.1250 1  1/8  1         1  1/4  4  1/4  4 330636 153.35 155.45 168.05
1.2500 1  1/4  1         1  1/4  4  1/4  4 330640 172.40 171.50 184.65
1.5000 1  1/2  1  1/4  1  1/2  4  1/2  4 330648 213.50 217.85 227.00
1.7500 1  3/4  1  1/4  1  1/2  4  1/2  6 330656 275.50 * *
2.0000 2         1  1/4  1  1/2  4  1/2  6 330664 317.25 312.00 329.05
* Call for price & availability.

Do you need special 6° Right Spiral Flute End Mills?

If you can't find the specific 6° Right Spiral Flute End Mills you are looking for we can manufacture it for you as a special. Simply fill out our Special Tool Quote Form and fax it back to us at 941-739-2827. You can also send us a message with your requirements through our Contact Us page. We will provide you with price and delivery for your special 6° Right Spiral Flute End Mills.

Thank you for using Lexington Cutter for your 6° Right Spiral Flute End Mills.